The intelligent construction Wall Production Line is high automation, strong stability, high production efficiency, advanced technology which reduces the cost of products, improve the quality of products and production efficiency.it is the current advanced light partition board mechanized production line.
Release date：2020-07-19Views：次
No | cause | Exclusion methods |
1 | The churning knives on both sides are badly worn and the material is not enough | Replacement of churn knife |
2 | The distance between the two sides of the churning knife and the wall panel is too different | Adjustment |
3 | Water-cement ratio is small | Adjust water-cement ratio |
4 | There is a blockage on both sides of the hopper, resulting in uneven discharge | Flip the hopper with steel drill |
5 | The vibration plate is not consistent on the left and right, and the tilt is too large | Adjustments to consistency |
6 | Too narrow outlet size affects discharge | Correct adjustment |
7 | Improper adjustment of height difference between vibrating plate and forming scraper | Correct adjustment |
8 | The forming scraper and the wall board are not cleaned, and the adjacent corner seam is caked with ash | Take care to clean up and remove caking |
9 | Caking material stuck | Shutdown, remove bulk material |
10 | A material with a particle size of more than 15 mm is mixed into the raw material | Sieve, remove |
