The intelligent construction Wall Production Line is high automation, strong stability, high production efficiency, advanced technology which reduces the cost of products, improve the quality of products and production efficiency.it is the current advanced light partition board mechanized production line.
Release date：2020-07-20Views：次
No | analysis of causes | Exclusion methods |
1 | Improper height adjustment of molding cavity | Adjustments under b 7.1 |
2 | The rubber pad is pressed too tightly to make the amplitude too large or too small | Adjust to appropriate tightness |
3 | Vibrating plate jammed | Adjust the front and back of the vibration, left and right clearance, so that it is in a free state |
4 | The ground is uneven, the ground has the sundries and so on reason causes the extruder to advance the resistance too big | Repair the site, clean up the debris, remove the various factors that increase the resistance |
5 | The vibrator rotates in the wrong direction | Vibrator wiring switch |
6 | Vibrator bearing damage, too low exciting force | Repair or replacement of vibrators |
7 | Excessive wear and tear of the churning knife to move the forming area forward | Replacement of auger |
